Bearing Use of Crawler Down-the-Hole Drill

 Bearings are familiar to everyone and are closely related to our lives and work. From bicycles to automobiles or construction machinery, there are bearings, and Drilling Rig is inseparable from them. The bearings of the Advanced Crawler Mounted DTH Drilling Rig are precision parts, and they must be maintained in daily work to make it more effective. Pay attention to the following points when using bearings.

When installing the bearing, do not press hard, do not use a hammer or other hard objects to strike, and do not transmit pressure through the rolling elements; use professional tools when installing, do not brute force; usually keep the rotary excavator bearing clean, Even a trace of dust may cause bearing wear; the bearings of rotary excavators should be treated with rust prevention.

The bearing is a precision part of the crawler drilling rig. The damage of one small thing will cause the failure of the entire crawler drilling rig. Therefore, we must pay attention to daily use and maintain the rotary excavator in many aspects to ensure its normal operation and avoid overloading.

Bearings are familiar to everyone and are closely related to our lives and work. From bicycles to automobiles or construction machinery, there are bearings, and crawler drilling rigs cannot do without them. The bearings of crawler drilling rigs are precision parts, and they must be maintained in daily work to make them play a greater role. Pay attention to the following points when using bearings.

When installing the bearing, do not press hard, do not use hammers and other hard objects to strike, and do not transmit pressure through the rolling elements; when installing, use professional tools and do not brute force; usually, keep track-type drilling rig bearings clean. Even a trace of dust may cause bearing wear; bearings should be rust-proofed.

The bearing is a precision part of the rotary excavator. The damage of a small thing will cause the failure of the entire rotary excavator. Therefore, we must pay attention to the daily use and maintain the rotary excavator in many aspects to ensure its normal operation and avoid overloading.

Crawler Mounted Drill Rig

Various inspections before starting the Crawler Mounted Drill Rig

1. Check whether the oil in each fuel tank is sufficient and whether the oil quality is normal

2. Check whether the gear oil quantity of each reducer is sufficient and whether the oil quality is normal

3. Check whether there is a wear failure, tighten the loose clamp

4. Check whether the lifter rotates flexibly and whether the internal grease is contaminated

5. Check the frame structure for cracks, corrosion, desoldering and other damages, and tighten the screws

6. Check the working status of various power lines, sensors, operation interface handles, etc.

7. Check whether the main and auxiliary steel wire ropes have broken wires and whether the connection is safe, reliable, and intact, and whether the power of the rope press is sufficient

8. Are the transmission components tight?

9. The engine gear system warms up for 5-20 minutes according to different climates, and check whether the instrument is normal.