JKS600S Crawler Mounted Telescoping Mast Drill Rig

Crawler Mounted Versatile Well Drilling Rig
borewell drilling equipment

The rig is able to place casing of 6 meters.
Rated Drilling Depth
600m
Site Condition
It is mainly applicable to the drilling process of wells, monitor boreholes, geothermal boreholes and defense project.
Product Features
JKS600S crawler mounted telescoping mast drill rig is a new, efficienct, multifunctional hydraulic well drilling rig, mainly applicable to the drilling process of well, monitor boreholes, geothermal boreholes, dam and reinforced base and defense project. 

The rig is able to handle size up to 6 meters
When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, with high penetration speed. 
In loose rock, the rig employs hammer and casing as well as mud drilling.
Hydraulic supporters used facilitate the rig erection on site without crane.

Rated Drilling Depth
600m
Borehole Diameter
140~350mm
Engine Power
132kW
Max Lifting Force
32T
Axial Pressure
±10T
Lifting Force of Small Winch
1.5T
Rotation Torque
9000N.m
Rotation Rate
0～35/70rpm
Feeding Stroke
7000mm
Hydraulic Supporting Leg Stroke
1650mm
Lifting Rate
0~15m/min
Grade Ability
15°
Dimension (L x W x H)
7300mm x 2250mm x 2850mm
Working Size (W x H)
3250mm x 12900mm
Weight
15T
Hydraulic Generator (optional)
24kW/380V 
Flow of Centrifugal Mud Pump (optional)
1500L/min 
Flow of Plunger Mud Pump (optional)
1000L/min

评论

发表评论

此博客中的热门博文

Preparation Work Before Hydraulic Dth Drill Rig Construction.

  The construction of hydraulic down-the-hole drilling rigs has the characteristics of fast hole formation, high quality, no noise, and no pollution. Because of its unparalleled advantages in the construction of cast-in-place piles, it is favored by more and more construction units. Therefore, the current price segment Drilling rigs are the main force in underground engineering construction. 1. Construction site:  hydraulic DTH Drilling Rig  for pile foundation construction. In the preliminary preparation stage, the construction site is required to be high. Due to the heavyweight of the rotary drilling rig, the operation of the rotary drilling rig requires the machinery to remain stable, so the operation The site reaches a certain bearing capacity. If the working surface is a relatively soft stratum, the supporting layer should be backfilled so that the site can carry the  hydraulic DTH Drill Rig , and the cranes (above 25t), concrete filling trucks and other eq...
阅读全文

Maintenance of Power Head of Crawler DTH Drill Rig

  The powerhead is the most important working mechanism of the  crawler DTH Drill Rig . Effective maintenance and maintenance measures can better guarantee the performance of the drill and create greater economic benefits for customers. 1. Maintenance and maintenance of powerhead drive device Change the oil for the first time after 100 hours of work in the early stage; change the lubricating oil every 1000 hours of work or 12 months (according to the earliest); check the tightness of all screws and bolts at least once a month. 1. Check and add lubricating oil for the driving device: a. Observe the oil level through the oil level sight hole above the powerhead reducer to ensure that the oil level is between the upper red marking line and the lower red marking line. b. If the oil level is lower than the lower red marking line, you need to add lubricating oil through the oil filler port until the oil level is between the upper red marking line and the lower red marking line. 2. I...
阅读全文

What Is A Water Well Drilling Rigs?

图片
What is a  Water Well Drilling Rigs ? Simply speaking, a water well drilling rig is a mechanical device that drills a water well and completes downhole pipe, well washing, etc., including power equipment and drill bits, drill pipes, core pipes, drill stands, and the like. Below  DTH Drilling Rig Supplier  will introduce the classification and working principle of the water well drilling rig and the correct use of the water drilling rig.  1. Hydraulic oil pump: It is a double-type, large displacement pump provides power for the power head. The small displacement pump provides power for four leg cylinders, landing mast cylinders, and afterburning/lifting cylinders.  2. Four legs: The small well drilling equipment consists of a hydraulic cylinder and a fixed frame. The level of the body can be adjusted at the work site to support and stabilize the body.  3. Mast: It is a frame structure welded by giant steel pipe, channel steel and angle steel. The inne...
阅读全文