Rules For The Use Of DTH Drilling Rig

(1) Installation and preparation of the DTH Drilling Rig
1. Prepare the rock cavern. The size of the cavern can be determined according to the method of perforating. Generally, the height of the cavern is 2.6-2.8 m when the horizontal hole is drilled. The width of the cavern is when the hole is drilled, the hole is down or the hole is inclined. It is 2.5 meters and the height is 2.8-3 meters.
2. Lead the gas and water pipelines, lighting lines, etc. to the working surface for use.
3. According to the design requirements of the hole, the pillars are erected firmly. The upper and lower ends of the pillars are to be covered with wooden boards. The horizontal shaft and the snap ring are mounted on the pillars according to a certain height and direction. The machine is lifted by a hand winch, fixed to the pillars at a desired angle, and then the holes of the drill are adjusted. to.
(2) Inspection before operation
1. When starting work, carefully check whether the gas-water pipeline Of DTH Well Drilling Rigs is firmly connected and there is no leakage or leakage.
2. Check if the oil is filled in the oiler.
3. Check that the screws, nuts, joints, etc. of each part have been tightened, and the column is indeed very strong.
(3) Punching operation procedures
When opening the hole, start the motor first, and then push the handle of the manipulator after the normal transfer. Make it get the proper propulsion, and then pull the handle that controls the impactor to the working position. After the rock drilling work, the water valve can be opened to keep the gas-water mixture in proper proportion for normal rock drilling work.
DTH Well Drilling Rigs

评论

发表评论

此博客中的热门博文

What Are the Types of Drilling Rigs?

图片
With the continuous development of   drilling rig machine  production , the use conditions of drilling rigs are becoming more and more diverse, and various types of drilling rigs have appeared accordingly. Factors affecting the type and composition of drilling rigs include drilling methods, drilling depth, borehole size and drilling tool size, drilling area conditions (such as electricity or fuel, transportation, meteorological conditions), etc. The  t ruck mounted drill rig  is the main machine  that completes the drilling construction. It drives the drilling tool and the drill bit to the deep part of the formation and completes the lifting and lowering of the drilling tool and casing, and the extraction of the core through the elevator (winch) on the drilling machine. , Auxiliary work such as replacement of drill bit. The main function of the pump is to deliver flushing fluid into the hole to clean the bottom of the hole, cool the drill bit and lubricate the drilling tool. Dri
阅读全文

What Happens When Hydraulic Drilling Rigs Use Emulsified Hydraulic Fluid?

图片
  The emulsification of hydraulic fluid is the deterioration of hydraulic fluid. The use of emulsified hydraulic oil will have a very serious impact on the hydraulic system of hydraulic   drilling rigs , which is called the "white blood disease" of hydraulic drilling rigs.   Performance of hydraulic oil emulsification If you find that the hydraulic components of the hydraulic column drilling rig are weak, there are obvious bubbles in the oil tank and the oil temperature is too hot, it is recommended to open the oil tank cover to check whether the oil is white, if it is white and emulsified, it is recommended to clean the pipeline and replace the pure hydraulic oil immediately. Can no longer use emulsified hydraulic oil, "white blood disease" will really ruin the hydraulic drilling rig!   The danger of emulsified hydraulic oil to  hydraulic drilling rigs Hydraulic fluid emulsification is the deterioration of the hydraulic fluid. The use of emulsified hydraulic oil wi
阅读全文